English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Plasma - J4
Categories : Surface Treatment Equipment
Plasma Treater Country of Origin：Taiwan Plasma treaters produce plasma surface treating to promote the adhesion of inks, adhesives, coatings, sealants & paints. Manufacturers integrate in-line plasma treatment equipment to enhance adhesion on plastics, composites, metals & glass surfaces. The plasma pretreatment process cleans, etches, & functionalizes surfaces to activate bonding sites by increasing wettability & surface energy.
Automatic Oil Hydraulic Powder Forming Machine - LA/LB Series
Categories : Pressure Forming Machines
● Melamine powder, urea powder and phenol powder etc material molding forming use. ● Continuous automatic operation can be molded without help of an operator. ● Oil hydraulic type, high-speed powder forming. ● Molded tablets are uniform accurate in weight and size density. ● Hardness of tablets can be regulated by adjusting the hydraulic system. ● According to different sharp of molded tablets to change different punch size.
Twin Shaft Shredder-X Series
Categories : Plastic/Rubber Shredder
X Series Twin Shaft Shredders are extremely high torque, high throughput, rotating shear type size reduction machines often used for pre-shredding of large volume or high strength materials which may contain contamination. The unique modular split chamber design, provides excellent access to key components therefore reducing maintenance downtime and service costs.
Auto Tension Sensor
Categories : Web Handling & Tension Control
The Edge Position Control (Multi degree) is from Italy, Europe, which can automatically detect web tension and send the parameters to control unit.
Vibrating Screen
Categories : Separators
The CYKF Vibrating Screen is used for sorting plastic pellets. It divides the pellets discharged from pelletizer. The machine can be combined with our strand pelletizing or underwater pelletizing extrusion lines.
Perforation Machine(YSW-DC)
Categories : Hydraulic Punching Machines
• It is equipped with slitting knife can do in-line slitting. • Using Human machine interface control system.
Co-rotating Twin Screw Underwater Pelletizing Compounding Line | CK-HT
Categories : Twin Screw Extruders
CK-HT series Co-rotating Twin Screw Underwater Pelletizing Compounding Extrusion Line is designed especially for compounding materials with high viscosity, low MI, or difficulty to be shaped. The extrusion line can be applied to a wide range of materials and applications. Possible materials: TPU, TPE, TPV, TPR, PP, PS, PLA, PVA, SEBS, EVA, Rubber, Hot-melt adhesive, Special resin, and Micro pellet, etc.
Electronic Analytical Balance Scale
Categories : Dosing and Measuring Equipment
The DT analytical balances accurately measures the weight(denier) of PP/HDPE flat yarn.
Double Arm Open Type Kneader
Categories : Dispersion Kneaders
The KD double-arm kneader is available with a variety of blades in different shapes as well as with number of discharging methods and mixing conditions. This KD double arm kneader has already achieved considerable renown in a wide range of industries that deal with such high and medium-viscosity materials as adhesives, agglutinates magnetic materials and chemical material mixing. Applications: Banbury Type Lade Adhesives Hot-Melt materials Sealing Materials Ceramics Magnetic compounds Silicon Rubber Sigma Type Blade Printing inks Tapes Pigments Thermosetting Resins Chemicals
Accumulator Head Blow Moulding Machine for Table Top
Categories : Extrusion Blow Molding Machines
Compact design with less footprint Energy saving with high/low pressure circuit ONE HMI for total operation function Remote access for support diagnosis and troubleshooting Product range up to 22kgs shot weight
Master-batch Feeder for Powder (MFP)
Categories : Feeders
Easy operation: Enter the weight of the resins, screw back time, dosing capacity per turn and additional rate of the masterbatch, it will calculate proper R.P.M. rate automatically. The function is available to store up to 10 sets of R.P.M. Setting memory. Flexible extension: Each feeder controls and operates individually. It is easy to add extra a feeder or change the type of screw later. A dosing and mixing system of various resins is available for your early inquiry. Precise calculation: With the special process, the internal part of the unit has no dead corners and makes the dosing process more accurate.
Fully Automatic High Speed 2 Lines Core & Coreless Bag on Roll Making Machine / SRCR-40 / SRCR-50
Categories : Plastic Bag Making Machines
Computer control over the entire process From film roll to final pruduct, one process flow Automatic film feeding, cordination free from tension adjustment Automatically stop when running out of film / color scanning error / film feeding blocks or jam Automatically core changing system
Hydrographic/Water Transfer Film- Design
Categories : Hydrographic / Water transfer Machines
Custom design patter include jaguar, shinning class, paisley, black zebra, Leopard, wire cloth, star, black pomo , orange flames, water drip, US dollar. Spot pattern, color bean. Any custom design pattern YHT have the ability to develop and print.
DASHBOARD WELDING MACHINE
Categories : Automatic Welding Machine
There are 3 sets of car dashboard welding equipment: 1. Air duct welding machine. 2. The main body of dashboard and inner air duct welding machine. 3. The main body of dashboard welding machine.
Mold Temperature Controller (YBMI/YBMD)
Categories : Control Equipment
Steady controlled temperature makes plastic molding accurate in size and consistent with quality. Accurate mold temperature solves the problem of plastic flow patterns, reducing flow and weld lines, gloss appearance, record grooves effect, silver streaking, stress-whitening, warping, and etc.... P.I.D temperature controllers are used for accurate control of temperature within±1℃. Two-step-heating selector makes rapid temperature increasing possible when require thus saving time and power specially start up in the morning. Patented “Heat-insulated” design improves your safety, extend the machine’s lifetime and make maintenance more efficiently. YBMI : By oil, suit for long-term continuous operation, keep the temperature steady, no flash on tiny and thin products, and no corrosion. However, the heater may be damaged if you do not use the thermo oil correctly or change oil routinely. Recommend to choose oil-type mold temperature controller when your required temperature is 150℃ or above. YBMD : By water, heating up faster, cooling better, harmless to your mold and more economic than oil type for maintenance and cost. However, the water boiling point is low and the element of different water may occur corrosion or limescale to affect the heat exchange and products quality. Recommend to choose water-type mold temperature controller when your required temperature is 150℃ or below.
LDPE/LLDPE Heavy-Duty Film Blowing Machine
Categories : Blown Film Extruders
Heavy-duty Film for Construction and Agricultural Applications Tubular lay flat width:From 40mm to 7 meter. MONO LAYER, TWO LAYER, THREE LAYER & FIVE LAYER -SINGLE COLOR, DOUBLE COLOR, UP TO 4 COLOR.
Accumulator Head Type Blow Moulding Machine ABI series, 2 Layer, 1000lt IBC Bottle
Accumulator Head Type Blow Moulding Machine ABI series, 2 Layer, 1000lt IBC Bottle
High Speed Slitting Machine
Categories : Slitters and Rewinders
Application： OPP、BOPP、PET、PVC、transfer paper、foil、Non-woven cloth…etc. yicheen High speed rewind, machine speed is 1~300M/min duplex rewinder Swing out unwind and rewind air shaft. Equipped with automatic tension controller and load cell, tension value digitally display, increase tension control precision and stable. Equipped with EPC/LPC position control to ensure accurate slitting position. Equipped with razor cutter and circular shear cutter. Rewind section equip with diameter-detector to control rewind motor speed. Equipped with pneumatic press roller on re-winder to eliminate the air go into rewind film and avoid film slip. Full digitally computer control system, equipped with PLC and touch panel system ,error message alarm and indication are displayed on the screen.
Hot Runner Temperature Controller Chassis Series - TC5T
Categories : Control Equipment
Single module control two points temperature Standby/boost Function Built-in Buzzer Smart SOFT START function Manual output in case of temperature sensor unusually Output percentage limit setting Arico
EPC - Multidegree
Categories : Web Handling & Tension Control
The Edge Position Control (Multi degree) is from Italy, Europe, which can automatic control the edge to the right position by multi-degree moving.
Insulation Plus Ceramic Band Heaters
Categories : Heating & Thermal Control Systems
Saving in energy up to 30 % Reduced wattage of heater More uniform heating Less down time increases productivity Reduced preheating time of machine Heater cost is recovered in shorter time Cool working atmosphere for operator Arico
YHT Manual Spraying Gun
Categories : Hydro Dipping Spraying Equipment
High efficiency spray gun, completely atomizes activator when spraying. Suggest it is used for spraying base coats, clear coats, and activator. Consistent spraying and atomization will provide you excellent result. Cooperate with ： Spraying Booth for base coat and top coat dipping machine
Vertical Type Cooling Blender Machine
Categories : Mixers and Blenders
Special design for manufacturing processes for wood plastic composite resin.
Heating Side Sealing Slitter Rewinder - FSH
Categories : Slitters and Rewinders
For Side Sealing Slitter Operations: Suitable for producing various film rolls for extruded materials, such as HDPE, LDPE, LLDPE, PP, CPP, and etc.. Product thickness range from 0.006 to 0.1 mm. Production speed 20-40 meters per minute in 2-6 lines (Slit width over 40mm). For Regular Slitter Rewinder Operations: Suitable for slitting various materials, such as, cellophane, PET, OPP, CPP, PE, PS, PVC film rolls and printed films.
Skip Conveyor
Categories : Loading and Conveying Machines
For material conveying after from dispersion Kneader
High-Speed Injection Molding Machine (SA-p Series)
Categories : Toggle Clamping Injection Molding Machines
It is a newly-released servo hydraulic energy-saving model with outward toggle clamping unit, especially suitable for producing bucket containers. With clamping force ranging from 220 tons to 1,000 tons.
Intermesh Dispersion Kneader Mixer For Rubber And Plastic
Categories : Dispersion Kneaders
The new technology design of this dispersion kneader is equipped with a unique engage-type rotor for mixing/kneading rubber / plastic compounds with different characteristics. The special features are as follows: Fast mixing time. 3-8 mins / batch (depends on different material characteristics, feeding time,cleaning time, and so on) It is specialized for materials requiring low temperature, high oil consumption, and materials with very low hardness, ensuring homogeneous distribution and the highest degree of dispersion mixing. Construction of machine is strong and stable, with no shaking during mixing processes. Accurate temperature control system. Efficient cooling system. Can be applied for different composite materials. Pressure lid is driven by oil hydraulic system which can be adjusted to reduce energy consumption.
Pellet Blender
Categories : Mixers and Blenders
Pellets Blending for Rubber, Plastic & Chemical Industries For Pellets blending
HOT PLATE PLASTIC PALLET WELDING MACHINE KMH-112 (LEFT-IN RIGHT-OUT)
Categories : Automatic Welding Machine
1. Using a hot plate to melt the surface of the welding parts, then forced welding parts to join together. 2. It can meet the requirements of tight joint without damaging the surface of the working piece, and reach to welding effect of waterproof and airproof . 3. Suitable for large or irregular plastic pallet processing. 4. Machine type can be divided into semi-automatic and fully automatic equipment. 5. The pallet feed from left side of machine and collected from right side of machine by convey