English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
PET Stretch Blow Molding Machine - EX02MC
КАТЕГОРИИ : Automatic Blow Molding Machines
● Blower power consumption for 1000 bottles: 2Wh. ● Air Compressor power consumption for 1000 bottles: 6 kWh compact space. ● Screw driven controlled by servo motor providing fast and smooth motion. ● Single lamp bilateral centralized heating, easy controlled within 3°C and energy heating. ● Low-pressure air compressor will NOT be required due to high-pressure recovery system. ● High efficient air recovery system up to 45%.
HIGH-SPEED STEEL MOLD CUTTER HSP-12
КАТЕГОРИИ : Foaming Machinery
Innovative Feed Mechanism： In which, the auto up/down feed system is designed for the height of the molded material. Superb And Stabilized Dead-Point Accuracy： For which the dual-axle synchronized mechanical structure is designed to achieve higher lower dead point stability. High-Precision Depth Adjusting Mechanism： Which uses left/right synchronized fine-tune unit to achieve 0.01mm of fine-tuning accuracy. Parameter Saving Function： To name and store relevant parameters after being set. Molding Machine On-Line Function： To carry out synchronized control with other molding machine through on-line operation. Automatic Lubrication Mechanism： In which, the automatic lubrication mechanism is designed to reduce the daily maintenance work.
PC/ABS Alloy - FR-CA8271AHF
КАТЕГОРИИ : ABS Resin
Flame retarded, black colored. Application: Electronic, Electrical cases, Thin-wall application, Automotive parts.
PA6 (Electrical grade)
КАТЕГОРИИ : PA(Polyamide) /Nylon
Provide static dissipative and electrostatic discharge protection requirements.
PC / ABS Alloy - CA6421B
КАТЕГОРИИ : PC Resin
General purpose. Application: Electronic, Electrical cases, Thin-wall application, Automotive parts.
Plastic film and bag cutter
КАТЕГОРИИ : Cutting & Slitting Parts
Used in many bag making and packaging machines.
PET BOTTLE BALE PRE-PROCESSING CLEANING SYSTEM
КАТЕГОРИИ : Bottle Recycling Lines
RECYCLING, SORTING & INSECTION SYSTEM In addition, KOWIn develops 7 series of PET Multi vacuum extrusion-pelletizing machine to meet the demand of PET flake granulation. KOWIn multi vacuum PET extrusion-pelletizing machine is the lowest IV drop in the world. Some of equipment which is contact with water, so the bearing is very important. KOWIn develops the unique design of bearing. The bearing life is more than 15 years. All of KOWIn equipment has installed this unique design of bearing if it need to contact with water.
SINGLE-SHAFT TYPE SEMI AUTOMATIC CLING FILM REWINDER (SRS-1S 20-50)
КАТЕГОРИИ : Slitters and Rewinders
SRS-1S One-shaft type semi-automatic rewinding machine. It’s suitable for rewind PE, PVC cling film. While it’s light and small, it can afford material width up to 200-500 mm, and the finished paper core’s I.D. from 25-76 mm. Users are able to set the timer of automatic back off after rewinding accord to their usage habits. Simple touch screen interface, easy operations. SRS-1S let users realize every function quickly. It reaches targets rapidly through simple operations. Welcome to consult machine with us. We will at your service
5 to 11 Layer High-barrier Cast Film Extrusion Machine（SupereX Series）
КАТЕГОРИИ : Film and Sheet Extrusion Lines
SupereX high-barrier cast film extrusion machine line is Jinming's high-intellectualized and high-performance series with features of high-output, high-automatization and superior thickness deviation, etc.. Besides, SupereX has a good adaptability of resins, which meets customers' needs on high quality and high output.
Liner Insertion Conversion Line
КАТЕГОРИИ : Bag Making Machine by Applications
Innovative design for inner liner inserting-cutting-sewing in one process.
PET Sretch Blow Molding Machine - Small Capacity of Diversity Bottle Production Line (LM Series)
КАТЕГОРИИ : Automatic Blow Molding Machines
Automatic PET stretch blow molding machine LM series match with high-speed precision blowing valve, air recovery converting to pressure operation will reduce air consumption. Preform from hopper transfer to unscrambler, automatically deliver to single channel by sequence. Shorten heating pitch to decrease energy waste and increase heating efficiency. Automatic PET stretch blow molding machine LM series adopt continuously centralized heating method Cooling ramp and air blowing device, effectively isolating preform neck to avoid preform neck deformed causing by overheating.
VALVE GATE-NL SVDP
КАТЕГОРИИ : Hot Runner Systems
Pneumatically shut-off nozzle can create a flawless gate with no drooling and no stringing. Gate only leaves a small witness ring. The large gate openings are possible. This makes processing at high-flow rates much easier. The valve pin can be closed allowing plastification during mold open stages.
ULTRA LOW ENERGY DRYER
КАТЕГОРИИ : Dryers and Dehumidifiers For Plastic Materials
The first ULTRA Low Energy Dryer for plastics. Ultra-low kW energy usage - fast ROI and savings for a lifetime. Drying costs so low, it’s almost free Energy efficient unique vacuum drying technology Faster drying, faster start-ups, minimal maintenance
5 Gallon PET Preform Injection Molding Machines & Whole Plant Turn-Key Solution
КАТЕГОРИИ : Horizontal Injection Molding Machines
KING’S SOLUTION CORP. acquired 18 years of 5-gallon PET preform production practice experience from KING'S MACHINERY ENGINEERING CORP. We provide the full process of Dehumidification Drying raw materials, quantitative additive color mixing machine, rapid and stable injection molding output of bottle preform, mold with 8+8 hot runners, rapid cooling robot mechanism, and the blowing bottle machine itself; Total production cost down with high productivity, and lowest blow bottle defect rate of only 0.5%.
C type Injection molding machine with rotary table
КАТЕГОРИИ : Rubber Injection Molding Machines
C type Injection molding machine with rotary table With C type configuration to have easy operation access. Rotary table design with two molds shifting to increase production efficiency. Feeding rupture detect to prevent process from rubber shortage. With external heating platen to maintain mold temperature. Automatic operation can be realized by having the auto de-molding device and cleaning system. Rotary table is driven by servo motor which can offer multi-station production with different positions stop. User-friendly color touch screen interface to facilitate all parameters settings and observation. Option available: Auto de-molding device and cleaning system. OPC-UA configuration to connect with MES/ERP system. With the Cold Runner Block (CRB+) control system.
plastic shredder SP-420 / 60205
Especially for bulky plastic products. Eliminate the disadvantages of traditional high horse power crusher.Also for cracking unusual objects,waste tyres,logs,sleepers,etc. ● 2-shaft,claw-cutter breaker has the best ability to shred anything with low noise,vibration free. ● Auto reversible equipment to prolong the life of machine.
YR Multiple Embedded Rotary Injection Molding Machine Series
КАТЕГОРИИ : Vertical Injection Molding Machines
Vertical clamping with vertical injection. Rotary table oscillate 180 °, rotate back / forth for easy loading and finished parts pick out, to increase productivity. Rotary table with location pin, accurate positioning for mold alignment and automation. Robot interface capability for complete automation. Standardized wtih 2-sation function, and capable for 3-station or 4-station function & automation linkup for advanced efficiency. Standardized wtih 3-column clamp, and available for 4-column clamp upon request.
FLEXOGRAPHIC PRINTING MACHINE
КАТЕГОРИИ : Flexographic Printing Machines
Durable and firmly machine frame design reduce vibration on high-speed running. Dryer system available in high-speed running and water base ink. Accurate printing quality, colour adjust individually during operation.
HA-1100SW
КАТЕГОРИИ : Industrial Robots
The whole machine used a linear slide drive Slide rails are equipped with automatic oiling device In line with the needs of high-speed machine design
P-18
КАТЕГОРИИ : Injection Molds
Medium Co-extrusion Blow Molding Machine
КАТЕГОРИИ : Electric Blow Molding Machines
Chen Way machinery is well-known for its 20L three layers blow molding machine. The recycle resins and the calcium carbonate (CaCO3) in the middle layer help to save material cost. Three layers M/C is the most popular choice for the edible oil export countries, production ranges from 5L to 30L jerry can. The outer and inner layer composed of 15%-20% virgin material and master batches. The middle layer can put around 60%-70% cost effective regrind material and also can add CaCo3 (no more than 30%), which can reduce cost down to 10-12% material cost. By contrast, the single layer jerry can only add around 5%-7% CaCo3 which has no evident improvement over material savings. Chen Way CWM
DESIGN AND DEVELOPMENT PARTNER
КАТЕГОРИИ : Injection Molds
JDM / ODM SERVICES When bringing a new product to market or re-launching an existing product with new features, key success metrics are quality and timing t o market. Either or both may be negatively impacted if the design proves difficult to manufacture especially if there is a rapid demand for increased volume. A design partner who is well integrated with a full service manufacturing system knows how to minimize risk. Our design teams have executed numerous design-build projects for customers across a variety of industries on a global scale. We incorporate manufacturability, assembly and test principles into the EDI-early design stages involved of a product to assure seamless production. JDM/ODM services include : To use the PLM system to monitor the product life cycle management. Concept Development Mechanical Drawing Layout Documentation Verification Material Management & Sourcing Rapid Prototyping & Soft Tooling Initial Pilot Builds & DFM αTest /βTest/ Burn-in Tooling & molding in house Final Assembly Following the design phase of your product, we build prototypes to test the DFM manufacturablity and any industry compliances. Prototyping may occur multiple times at various points in the design and planning stages for a project. Once all the design and manufacturing issues are worked out, we can rapidly transition into full-scale production. Please visit our Contract Assembly page to learn more about our assembly facilities. OEM Our Original Equipment Manufacturer (OEM) service is responsible for designing and building a product according to a customer’s own specifications. Our service also includes & DFM,EDI,3D printer rapid prototype global distribution and returned product factory repair, which can greatly reduce customer’s overall production costs.
Gear Pumps Rubber / Silicone
КАТЕГОРИИ : Pumps & Hydralic Units
Made to customer orders, including rubber and silica .
LIQUID INJECTION MOLDING
КАТЕГОРИИ : Silicone Injection Molding Machines
Liquid Injection Molding (LIM) and Transfer Molding are preferred processes for manufacturing solid silicone rubber items used in a wide range of applications such as medical equipment, watersports, gas masks, military gear, waterproof device cases, 3C products and much more. MATERIALS: Shin Etsu / Dow Corning/ GE Silicones ADVANTAGES & APPLICATIONS: Low viscosity and lower injection pressure, good for silicon molding Good chemical stability and environmental protection High dimensional accuracy It produces high quality parts without secondary finishing and allows much shorter production cycles than other processes. Over-molding together with hard plastic frame (PC or ABS etc.) for waterproof devices, shock proofing, shielding, etc. Very thin wall design (0.25mm thick around) for silicone to adhere on plastic housing (rib) to meet the demand of low profile product design. Water proof feature can be secured by the combination of soft rubber contacts and with constant pressure provided by hard plastic housing (rib).
COLD DECK WITH 16 VALVE GATES
Shut-off nozzle design：Don't need to cut scrap. System temperature analysis：High efficiency heat isolation and cooling, uniform heating system. Module design of Cold Deck：Quick installation and easy to maintain.
Super Power Breaker And Crusher
КАТЕГОРИИ : Foaming Machinery
For high capacity to cut foam waste into small chips.
High Speed Automatic Side Sealing And Cutting Bag Making Machine
КАТЕГОРИИ : Plastic Bag Making Machines
Our high speed side automatic sealing and cutting machine is suitable for a range of shapes folds and pockets, interlinking with other equipment to be able to make even more types of bags for easy exchange. Some examples of pattern types include: punching equipment for round holes, butterfly holes, utilizes handheld punching equipment for accuracy and can produce perforations for letter and packaging tear off strips. Using a vertical up and down heat sealing system and supersonic sealing line device means improved sealing quality and can also produce anything from 'V' type standing pouches to handbags. If this isn't enough, we also can provide extra parts for improved production accuracy and quality, this includes EPC edge sensor, servo motor to drive the machinery and an automatic conveyer to get your finished products to the packing section as soon as possible. This machine is also suitable for already perforated and/or folded films.
Silicone Cutting Machine
КАТЕГОРИИ : Rubber Cutting Machines
Nature rubber Rubber of metal boned parts Oil resistance rubber NBR+PVC concoction Synthetic rubber Medical/Pharmaceutical usage rubber Heat resistance rubber
Automatic Metering & Conveying System
КАТЕГОРИИ : Loading and Conveying Machines
In addition to storing barrel for Vacuum packages and storage function, this unit automatically handles powder package conveying, featuring easy operation, and avoiding the need to carry and add raw material at Mixer operation platform. It also prevents dust leakage saves labor and time, and helps reduce processing cost. An environment-friendly and economic conveyor system that can increase the productivity by 30%, this is the ideal model for the plastic industry.
Bottom Sealing Bag Making Machine
КАТЕГОРИИ : Plastic Bag Making Machines
● For making 6 different types of bottom sealed bags ● 30% higher capacity ● Maximum output can reach 720 pcs/ hr
