English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
PE/PP Lamination Machine For Flexible Packaging
Categories : Extrusion Lamination Machines
PE/PP Lamination Machine For Flexible Packaging
Intensive Mixer
Categories : Rubber Mixers
Compounding For Rubber、Plastic & Chemical Industries Features: 1.Rotors: Two wings design with good cooling design. Excellent cooling ability. Anti-wearing treatment on the surface. 2.Chamber: Drill hole type jacket. Excellent cooling ability. Material contact surface: Hard chrome plating and fine polish. 3.Discharge door: Excellent sealing. No material leakage. 4.Ram: Drive by air cylinder. Good mixing and dispersion quality.
Side Entrance Two Stages Spaghetti Cutting Recycling & Pelletizing Machine
Categories : Plastic Pelletizer Machines
Big material storage barrel sustains stability during material input. User-friendly machine enables to reach high productivity standards. Feeding production is more stable than traditional force feeding. Able to open a input hole on top of barrel to conduct feeding formula and master batch pellets. It's a useful and productive type. Crusher is optional. With forced feeding hopper allows the machine to input two kind of material.
Automatic Tube Foiling & Capping Machine FCM 120-02
Categories : Capping Machines
1.This machine supports dual functions that can operate simultaneously or independently (Foiling + capping). 2. Equipped with intelligent Al inspection: tubes without orifice or with orifice defects wil not undergo Foiling. 3.Intelligent Al inspection ensures that tubes without foiling or with foiling defects wil not proceed to capping. 4. The capping torque value can be directly set on the HMI (Human-Machine Interface). 5. Products with orifice defects, foiling defects, or incorrect capping torque wil be automatically rejected through the defective product outlet. 6. This machine can also be equipped with a positioning photoelectric sensor to enable snap-on type operation.
Ultrasonic Plastic Welding Device-Digitized Ultrasonic Module
Categories : Automatic Welding Machine
Automatic frequency self-checking at start-up Full bridge IGBT module are used in the generator to improve durability Automatic tuning (Frequency control). PWM(Plus Width Modulation) amplitude control Protection against Ultrasonic frequency deviation, high voltage and over current. Resonance frequency compensation during welding cycle. Time mode or Energy mode selectable. RS485 communication interface.(Standard Type) Connect to the computer to monitor and transmit each welding parameter and status(EXCEL).(Standard Type) Connected P/C/HMI, one P/C/HMI can control multiple sets of ultrasonic modules (up to 15 units).(Standard Type) Programmable PLC with HMI setting. (Touch Screen Type) 50,000 weld result histories stored. (Touch Screen Type)
EPS Pastic Waste Recycling Machine
Categories : Plastic Waste Recycling Machines
EPS PLASTIC WASTE RECYCLING MACHINE
Shrink Label Glue Sealing Machine (Sleeve Seaming Machine)-FK Series
Categories : Shrink Sleeve Machinery
The most economical investment for producing center glue sealing of PVC shrink labels. Simplified design, easy to operate and maintain
“Standard” Series SG-23E/30E/36E
Categories : Granulators
SG-23/30E series granulators have no significant differences with the standard model in construction and operability. The granulators feature quick blade change. They are suitable for centralized recycling of wastes or rejected parts from injection moulding, blow moulding and extrusion machines. Staggered blades can easily grab and granulate the materials. This design makes the machine work more efficiently and can reduce waste of energy to the minimum.
DR Die Lifter
Categories : Mold Parts
These Spring-Loaded Die Lifters easily slide into different sized T or U-slots on the bolster by adding spacers to the side walls of the Die Lifters. This allows for accurate and easy die positioning as well as quick and easy die removal. The DR Series Die Lifters are available in customizable lengths in increments of 100mm, and are available as either a ball type lifter or roller type lifter.
Low-Speed Mixer-PSE
Categories : Mixers and Blenders
The PSE low-speed mixer is a frequently used accessory for the PSM series co-rotating twin-screw extruder. Raw material does not heat up in the mixer which is beneficial to its stability. After the premix stage the material can be fed to the extruder via one of our PSA single-screw feeders, PSB twin-screw feeders, PSC twin-screw side feeders, or the PSD single-screw force feeder. Also compatible with feeders from other manufacturers or gravimetric loss-in-weight feeding systems.
Corona Treater - Blown Film TE-A Series
Categories : Surface Treatment Equipment
FOR HIGH SPEED 3 LAYER INFLATION LDPE/HDPE/PP/EVA/NYLON 2KW~10KW 600~2000MM 2 SIDE TREATMENT STAINLESS STEEL 2mm SEGMENT BAR
Tape Slitting Machine
Categories : Slitters and Rewinders
Application： BOPP tape, cellophane tape, masking tape… (according to customer informed material) yicheen
Reversible Rewinding Machine -FSR
Categories : Slitters and Rewinders
FSR Reversible Rewinding Machine is designed for rewinding operation of slit rolls, reels with uneven edge, or tension. Especially for rewinding on films with laminating paper, aluminum foil and other paper rolls after slitting. The FSR series also provide several flowcart satisfied the rewinding requirement for each different material.
Patented Housing Desiccant Rotor Dehumidifying Dryer (DHML)
Categories : Dryers and Dehumidifiers For Plastic Materials
Patented Housing Desiccant Rotor Dehumidifying Dryer (DHML) 1. Unique design of insulated desiccant rotor system. 2. Efficient and energy saving design of exclusive rotation mechanism for the rotor & desiccant chambers. 3. Easy-load design for desiccant replacement. 4. No pneumatic valves necessary to control the air flow between areas. 5. Accurate PID temperature controller. 6. Ideally design for PET preform systems. 7. Intelligent Microprocessor Control and premium overheat protector 8. Energy saving heater and unique design for saving electricity. 9. Well designed Solid State Relay (SSR) and protective devices. 10. Obtained numerous domestic and oversea patents of Japan, the United States, Germany, Taiwan and China.
Sleeve Rewinding and Inspection Machine (Reversible) - FSP-250-2
Categories : Slitters and Rewinders
The FSP-250-2 is an ideal re-reeling machine for round roll material inspecting process such as printing, surface or the seaming quality of shrink sleeves. 2 motors driven system and memorized reverse function allowed the winding direction changed during operation.
Foaming Injection Molding system
Categories : Shoe Sole Making Machines
Under the drive of lightweight and environmental awareness, using new technologies to reduce the product weight and the impact on environment has received increasing attention. “Foaming injection molding” application is one of the important developments. The technology of physical foaming is becoming mature enough to replace chemical foaming, which can achieve the ideal results by adjusting the process parameters, and at the same time, it can also solve the problem of sink mark caused by uneven foam cell size.
PET Bottle Recycling Washing System
Categories : Plastic Washing Line
PET Bottle Recycling Washing System
Fully Automatic High Speed Single Line with Core (V, C, N, M Fold) Garbage Bag on Roll & Table Sheet on Roll Making Machine / SMNRCR-1000
Categories : Plastic Bag Making Machines
Computer control over the entire process From film roll to final pruduct, one process flow Automatic film feeding, cordination free from tension adjustment Automatically stop when running out of film / color scanning error / film feeding blocks or jam Easy switch - able core to coreless function
Ultrasonic Plastic Welder KWD2620-N
Categories : Automatic Welding Machine
Automatic frequency self-checking at startup. Automatic tuning (frequency control). Resonance frequency compensation during the welding cycle. Full-Bridge IGBT module drives the transducer. PWM (Pulse Width Modulation) amplitude control, linear adjustment from 50%~100%. PWM (Pulse Width Modulation) startup vibration (8 selective ramp start-up settings). Protection against ultrasonic frequency deviation, high voltage and over current. External control box display ultrasonic frequency and welding energy. Frequency compensation as horn’s working temperature increase. Abnormal welding alarm. RS485 communication interface. 3 welding modes：Time mode/ Trigger pressure mode/ Energy mode (target & interval setting). Monitor and transmit each welding parameters and status (requires remove the control box and connect to the computer).
DB28 Die Lifter (Ball Type)
Categories : Mold Parts
The hydraulic DB Die Lifter employs universal bearings for superior forward and reverse, left and right motion of molds in and out of press machines.